Out of stock

Combat Robot Controller 2x10A With Arduino

Product Code: 825
Comments (0) | Add Comments
38.85 USD
Out of stock Alert when in stock Add to Favorites
Jsumo Robot parts shipment and price information
  • Features
  • Dimensions
  • Comments (0)
  • Payment Options
  • How Will We Ship To You?
  • We love mobile robot and Arduino too, and we believe many love it too. So here comes the Arduino + dual channel high current motor driver specifically for mobile robot design. It can be used in Sumo robot, Combat robot, Robot Rumble.

    This is Arduino UNO compatible with build-in dual channel 10A motor driver. The on board Atmega328P is the same microcontroller on official Arduino UNO and it is loaded with latest optiboot and you can select Arduino/Genuino UNO in Arduino IDE to develop program. It also offers several enhancements such as support for both locked-antiphase and sign-magnitude PWM signal as well as using full solid state components which result in faster response time and eliminate the wear and tear of the mechanical relay and reduce time for wiring. The board incorporates most  of the components of the typical  applications. With minimum interface, the board is ready to Plug and Play. Simply add in power, do simple coding and this board is ready to drive brushed motor.

    Features:

    • Support up to 30A  peak(10 second) and 10A(continuous) per channel.
    • Bi-directional control for two brushed DC motor
    • Current limiting at 30A.  
    • Solid state components provide faster response time and eliminate the wear and tear of mechanical relay.    
    • Fully NMOS H-Bridge for better efficiency and no heat sink is required.    
    • Speed control PWM frequency up to 20KHz (Actual output frequency is same as input frequency).
    • Support both locked-antiphase and sign-magnitude PWM operation.
    • Arduino sketch compatible.
    • Able to drive brushed motor from 6V to 24V.
    • Single power input for both motor and on board controller.
    • SMD ATmega328 microcontroller with Optiboot (UNO) Bootloader.
    • On board 1A (maximum) 5V voltage regulator.
    • On board 500mA (maximum) 3.3V voltage regulator.
    • 0-5V digital outputs with 3.3V compatible inputs.
    • 14 Digital I/O Pins (6 PWM outputs).(4 pin used for Motor driver)
    • 6 Analog Inputs (Can be digital I/O too).
    • ISP 6-pin Header.
    • 32k Flash Memory.
    • 16MHz Clock Speed.
    • R3 Shield Compatible.
    • TX, RX, Power, pin 13 LEDs are moved to edge.
    • LED indicator for I/0 pin
    • I/O extension
    • 2x HC-SR04 connector
    • Utilize USB Micro-B socket.
    • On board push buttons for fast test and manual operation.
    • No polarity protection
    • Dimension: 75.57cm x 99.7cm

     

    Documents:

  • All products shipped with sealed in box. All products packaged carefully. Before shipment, we test all electronics and control the mechanics of all products. So you will never be disappointed when you open our JSumo shipment box.

    We have 2 Shipment Options:

    • Registered Air Mail ( Fixed Price 9,95 USD, Free On Orders Over 199 USD)
      DHL Worldwide Express Shipment (Based on weight)

    TIME TABLE FOR INTERNATIONAL REGISTERED AIR MAIL

    Below, these countries are the only examples. If your country is not in the list, don't be afraid. We are shipping to all over the world including your country too:)

    *Colombia, Paraguay, Peru shipments are sent over Brazil Postal Service. ( Turkey >> Brasil >> Colombia, Paraguay or Peru) Because of that delays can happen. We are sending shipment code.

    What is your return policy?

    You may return a product for refund or exchange (if due to our error) within 30 days of the order shipment date. (The order shipment date and order notification are provided to you by email). All returns must be accompanied with a Return Merchandise Authorisation number (order number #).

    If we shipped you the wrong product, or it arrived defective or damaged

    No problem. Just contact us within 30 days of the item's original shipping date to arrange for the return of your purchase. Send us photo of wrong product. And we will send a replacement or refund you for your purchase, provided the returned item(s) are received back in their original packaging, along with all accessories, warranty cards, manuals, software, etc., where applicable.

  • All products shipped with sealed in box and packaged carefully. Before shipment, we test all electronics and control the mechanics of all products. So you will never be disappointed when you open our JSumo shipment box.

    We have 2 Shipment Options:

    • Registered Air Mail ( Fixed Price 9,95 USD, Free On Orders Over 199 USD)
      DHL Worldwide Express Shipment (Based on weight)

    TIME TABLE FOR INTERNATIONAL REGISTERED AIR MAIL

    Below, these countries are the only examples. If your country is not in the list, don't be afraid. We are shipping to all over the world including your country too:)

    *Colombia, Paraguay, Peru shipments are sent over Brazil Postal Service. ( Turkey >> Brasil >> Colombia, Paraguay or Peru) Because of that delays can happen. We are sending shipment code.

    What is your return policy?

    You may return a product for refund or exchange (if due to our error) within 30 days of the order shipment date. (The order shipment date and order notification are provided to you by email). All returns must be accompanied with a Return Merchandise Authorisation number (order number #).

    If we shipped you the wrong product, or it arrived defective or damaged

    No problem. Just contact us within 30 days of the item's original shipping date to arrange for the return of your purchase. Send us photo of wrong product. And we will send a replacement or refund you for your purchase, provided the returned item(s) are received back in their original packaging, along with all accessories, warranty cards, manuals, software, etc., where applicable.

Prepared by  T-Soft E-Commerce.