Load Cell Bar 0-10kg Force

This straight bar load cell (also called a strain gauge) can translate up to 5kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the bar. With this gauge you will be able to tell just how heavy an object is, if an object’s weight changes over time, or if you simply need to sense the presence of an object by measuring strain or load applied to a surface.

This straight bar load cell is made from an aluminum-alloy and is capable of reading a capacity of 5kg. These load cells have four strain gauges that are hooked up in a wheatstone bridge formation. The color code on the wiring is as follows: red = E+, green = O+, black = E-, and white = O-. Additionally, these load cells offer an IP66 protection rating and feature two M4 and two M5 sized thru holes for mounting purposes.

Applications

• Strain measurement
• Digital and Analog Electronic Weighing scales
• Weight Balancing Machines

Technical Specifications

Rated output: 1.0 +-0.15mV/V
Non-linear:0.03% FS
Lag:0.03% FS
Repeatability: 0.03% FS
Creep (5 minutes):0.03% FS
Output on Temperature Effect: 0.01% FS/C
Zero on temperature influence: 0.05% FS/C
Zero Balance: +- 0.1000 MV / V
Input impedance: 1115 +-10%
Output impedance:1000 +-10%
Insulation Resistance: > =1000 m
Safety Overload Rate: 150% FS
Ultimate overload Speed:200% FS
Operating Temperature Range: -20-60 C
Recommended operating voltage: 3 to 12 VDC.
Maximum operating voltage: 15 VDC
Material: Aluminum alloy
Protection class:IP65
Cable:0.8×25